Industry field guide
Landscape architecture path alignment and site records for AI
An outdoor route can move between plan versions while an older grade annotation remains in circulation.
- 2022 NAICS
- 541320
- Practice pack
- Example and answer key (JSON)
- Updated
What this guide tests
Which alignment has direct measurement evidence, and does moving its annotation onto B1 establish B1's value?
See the specimen and fields · Work through the fictional records
Task and source context
An outdoor route can move between plan versions while an older grade annotation remains in circulation. The U.S. Access Board publishes guidance for outdoor developed areas under the Architectural Barriers Act. A landscape architect can test version and measurement retrieval using an invented site. U.S. Access Board outdoor developed areas guide
Draw two alignments on an abstract site. Give the first a segment measurement and the second a revised segment identifier without a field reading. Ask the model to link the known measurement to its correct segment and state which value needs verification. Have a reviewer score alignment, revision and units separately.
Keep real boundaries, landowner data, protected site features and client plans out. Use your own drawings and leave compliance and design decisions with professionals.
Industry research
The U.S. Census Bureau’s industry definitions establish which activities these codes cover. The workflow sources in this guide describe the task or record type. Fiund’s pilot below uses fictional material to test a specific decision within that scope.
541320 · Landscape Architectural Services
This industry comprises establishments primarily engaged in planning and designing the development of land areas for projects, such as parks and other recreational areas; airports; highways; hospitals; schools; land subdivisions; and commercial, industrial, and residential areas, by applying knowledge of land characteristics, location of buildings and structures, use of land areas, and design of landscape projects.
Build a pilot sample
Set up this pilot
Draw two original landscape alignments and a measurement note attached to one. Copy the visual annotation to the other and grade the surviving source linkage.
Prepare the test packets
- Start with the worked case. Use the fictional record types below as a guide to the source files you need. Give each packet a stable ID and save its source versions with it.
- Change one fact. Make one packet with enough evidence to answer the question and one where the evidence points to a different answer. Keep the other fields fixed so a reviewer can tell what changed.
- Remove the decisive evidence. Give the reviewer a third packet with a plausible near-match in its place. Have them write what can still be established and what evidence would resolve the rest.
Fields the reviewer needs
- Alignment and segment revision
- Defines the measured geometry.
- Measurement source and condition
- Preserves the actual observation.
- Annotation-to-source link
- Exposes stale values on revised plans.
Use Build an AI evaluation from professional work to turn the specimen into a brief with a defined task, source and review owner.
Fictional exercise
A revised route cannot inherit a measurement from the old alignment
Two original abstract path alignments have dummy segment measurements. There is no real site, accessibility conclusion, protected feature or design approval.
| Record ID | Source | What it records |
|---|---|---|
| LAR1 | Practice alignment A | Segment A1 has reviewed measurement Q=4 units under condition C. |
| LAR2 | Approved plan revision B | Replaces A1 with differently routed segment B1. No B1 measurement supplied. |
| LAR3 | Circulating annotation | Shows Q=4 beside B1 but explicitly cites A1's earlier field card. No equivalence or new observation recorded. |
Question for the model. Which alignment has direct measurement evidence, and does moving its annotation onto B1 establish B1's value?
Show the reference answer
LAR1 directly supports Q=4 for A1 under condition C. LAR2 changes the route to B1 without a matching observation. LAR3 still cites A1's source, so annotation placement does not establish a new B1 measurement or equivalence. Report the verified old-alignment value and the new segment's evidence gap rather than treating a plan revision as a transferred field result or a compliance determination.
How to check the result
Ask for the answer, the record IDs that support it and any fact the evidence leaves unresolved. Have a reviewer compare the response against the reference before deciding whether the sample is ready to expand.
Errors to flag in this case
- Applying an old alignment's measurement to a differently routed segment.
- Treating a moved annotation as a newly verified field observation.
Change the inputs and run it again
Add B1's independent measurement with a different value while A1 remains in the archive. Require revision-specific retrieval rather than choosing the familiar older number.
Score the decision and the evidence separately
Save the reviewer’s expected answer, supporting record IDs and unresolved fields in a separate answer key. Score the model on the decision, its citations and its handling of the deliberate gap. A correct answer citing a different case counts as an evidence error.
Before expanding collection, have a second reviewer run the same checks on the held-out packet. Keep related versions, views and exports of the same case together so they stay on one side of the training and evaluation split.
Check permission and scope
Use independent abstract drawings. Exclude boundaries, owners, protected site features and client plans.
Use original or licensed practice material. Leave client work product, confidentiality obligations and regulated outcomes out of the sample.
Describe an authorized archive through Fiund’s existing-data assessment, or describe a new capture capability through the collection brief. The contributor agreement covers the terms for participation.
Sources and further reading
Resources for this workflow
Company and program reviews
Use these reviews to compare sourcing, capture or evaluation approaches. Confirm the applicable program, accepted sources and terms with the provider.
Compare the approach
Invisible Technologies review for expert-led AI training
Compare expert calibration and reviewer agreement before commissioning a professional-work evaluation.
Compare the approach
Mercor review for expert AI training work
Read how an individual expert role differs from licensing an employer or client’s work product.
Related industry examples
Industry guide · NAICS 541310
Architecture drawing issue and model revision data for AI
A drawing set and a model export can carry different revisions for the same element.
Industry guide · NAICS 541380
Testing laboratory records for evaluating AI measurement review
A test result is useful to an AI reviewer only if the supporting measurement can be traced.
Industry guide · NAICS 541340
Drafting markup and drawing dimension revision data for AI
Drafting services often receive a markup, revise a source drawing and issue a new copy.